High-quality construction fasteners
Back to catalog

elementa EAR 420UC

elementa
High-performance Bonded Anchor Based on Hybrid Vinylester Resin for cracked and non-cracked concrete elementa EAR 420UC
APPOVALS AND CERTIFICATES
fcs opt1 -18 - +40 EAR bim crack
c1 c2 NSF eiler 50 лет
Use for
  • Cracked and non-cracked concrete, solid stone, aircrete, сlaydite-concrete, masonry
  • Installation of noise screens, guardrails, electricity pylons, billboards, columns, beams, pillars, stairs, elevator guides, various equipment, rebar connections, ventilated facade substructures and glass facades
Advantages

  • elementa сoaxial cartridge"
  • Hybrid vinylester. Styrene free
  • Approval for installation at temperature from -18C to +40C
  • FAI «Federal Center of Standardization» Approval
  • Designed with eiler application
  • ETA Option 1 for cracked concrete
  • Approvals for seismic regions (Seismic performance category C1, C2)
  • Suitable for flooded and wet holes
  • For threated rods and rebars
  • Does not create stress in a base material
  • Minimum edge and spacing distance
  • Easy extrude resin from the cartridge
  • Multiple use system
  • Diamond drilled holes need more roughness
  • For indoors and outdoors applications

Application examples Installation procedure
Химия.Пробурить отверстие необходимого диаметра на требуемую глубину
1. Drill a hole of the required diameter to the required depth.
Химия прочистка
2. Blow out the hole twice from a drilling dust, perform the brushing twice and blow out twice again.
Химия. Заполнение
3. Extrude resin until the hole is approximately 2/3 full.
Химия.Установка шпильки
4. Install the threated rod in the hole and don’t disturb the anchor until the minimum cure time has elapsed.
Химия. Затягивание
5. Tighten the nut with recommended torque Tinst.
YOU PROBABLY ALSO NEED:
Cuttori catalogue.
Cuttori
More details