High-quality construction fasteners
Back to catalog

elementa ERA

elementa
Heavy Duty Through Anchor elementa ERA
APPOVALS AND CERTIFICATES
fcs opt7 r120 bim
sto2020 cniisk eiler
Use for
  • Non-cracked concrete of strength class C20/25 at minimum, solid stone
  • Installation of glass facade, ventilated facade substructures, elevator guides, railings, cable trays, columns, racks, reinforced concrete beams, engineering communications and other structures
Advantages
  • Seismic test video of elementa ERA anchor
  • FAI «Federal Center of Standardization» Approval
  • Designed according to "Anchor Fastenings to Concrete. Design Rules.", 2020
  • ETA Option 7 for non-cracked concrete
  • Seismic resistance tests «Central research Institute V. A. Kucherenko» for façade structure
  • Fire resistance R120
  • For pre-positioned and push-through installation
  • Steel grade 6.8 anchor body
  • White zinc plated ≥10 µm
  • Torque-controlled anchor
  • Reduced installation costs caused by reduced anchoring depth
  • Minimum edge and spacing distance
  • Stand-off installation due to increased thread length

Application examples Installation procedure
Пробурить отверстие необходимого диаметра на требуемую глубину
1. Drill the hole
Прочистить отверстие от буровой крошки.
2. Clean the hole
EAZ.Установить анкер в отверстие через прикрепляемую деталь
3. Install the anchor in the hole through the attached part
EAZ.Затянуть деталь динамометрическим ключом с рекомендуемым моментом затяжки Tinst
4. Tighten the nut with recommended torque
EAZ.Анкер установлен
5. Complete
YOU PROBABLY ALSO NEED:
Cuttori catalogue.
Cuttori
More details